2) Initialize the pattern-related parameter defaults
① Select '2' on the menu using UP or DOWN to initiate pattern-
related parameter values to default values and press ENTER.
② The display moves to the previous screen and '1' blinks. Select
'2'using UP or DOWN to format the extended memory and
press ENTER.
③ The display changes to the previous screen, and the extended
memory of the sewing machine undergoes automatic
formatting.
④ When the formatting of the extended memory is finished, the
turn-off message is displayed on the screen.
• If Format is conducted, all parameter values defined by users will be initialized to default values.
• In case where the power is cut off in the middle of Format execution, Format will be automatically
reactivated when the power is supplied again.
• In case where the power is turned on after the extension memory (28C010) on the digital board is
Caution
replaced, Format is automatically conducted.
62
OR
↓
OR
↓