6-2) Change The Pattern Data Information; Change The Pattern Data Information And The Initial Screen; Change The Speed - SunStar SPS/E-BH6100 User Manual

6-2) Change the pattern data information

1) Change the pattern data information and the initial screen

①
Select DATAINFO by pressing the DOWN key six times, while
the READY lamp is off.
②
Press ENTER and it moves to the initial screen for changing
parameter information.
Note
◀ ▶
When the screen is shifted, No. 1 flickers.
③
Press the UP, DOWN keys, and choose [HOME] or [RETURN]
to return to the initial display.
Note
◀ ▶
When the knife on/off key is pressed, the initial screen
appears.
④ Press ENTER and it moves back to the initial display.

2) Change the speed

a. Change the speed on the initial display
① Check that the READY lamp is off, and press the DOWN key
to select SPEED.
② Set the desired speed by using ◀ (+) and ▶ (-).
(ex : 2000rpm)
③
Press ENTER to store the chosen value.
↓
↓
OR
↓
↓
↓
OR
23