6-12) Changing the sewing start position
①
Turn the power on while pressing the LEFT key and the clamp
Up/Down key simultaneously. You can see '1' blink on the
screen. Select Group A and press ENTER to change the
sewing start position.
②
When a new screen appears, use the DOWN key to select
'A15:BaseP' and press ENTER.
③
When a new screen appears, use ◀ (+) and ▶ (-) to change the
sewing start position.
•Origin Position: The feeding base always returns to the origin
when sewing is completed.
•Sewing Position: The feeding base moves to the sewing start
position when sewing is completed.
④
Press ENTER and you can hear a "beep" sound, which
indicates the completion of the setting. The screen returns to
the Parameter Group A screen.
Origin
Position
60
[Origin Position]
R
[Sewing Position]
R
Sewing
Position
+
+
"Power On"
↓
↓
↓
↓
OR
↓