Function No. Related Pattern Programming - SunStar SPS/A-3020 5030 SERIES User Manual

3) Function No. Related to Pattern Programming
NO. Function
000 Thread trimming
001 2nd origin
002 Temporary suspension
003 One turn of sewing machine
004 JUMP
005 Point sewing
Linear/Curving line sewing
006
007 Linear sewing
008 Spline sewing
009 Arc sewing
010 Circle sewing
011 Change of jump speed
012 Change of stitching speed
013 Change of stitching speed
014 Pattern data reading from floppy diskette
015 Pattern data writing to floppy diskette
016 Floppy diskette formatting
Information indicatioin of present
017
pattern data
018 Coordinates setting
019 Linear zig-zag sewing
020 Spline zig-zag sewing
021 Arc zig-zag sewing
022 Circle zig-zag sewing
023 Linear offset sewing
024 Spline offset sewing
Addition of thread trimming code
Set of the 2nd origin
Temporary suspension in a particular point
Processing without sewing
Feed needle bar without sewing
Use when changing embroidery speed within one work patten.
Read the stored pattern from floppy diskette.
Store the programmed pattern into floppy diskette.
Format the floppy diskette.
Number of stitches, Speed, Backlash, X-magnification,
Y-magnification, Tracing, R-Pattern N0. W-Pattern No.
Absolute coordinate system/relative coordinate system
Contens
127