Operation
Administrator Operations
Setting Rotor Logging
When
Rotor Logging
selected, the user will be prompted to select the rotor in use.
1
Go to the
2
Press the
• The
3
Press the
• The ultracentrifuge will keep track of rotor usage.
• Users will be required to select a rotor prior to starting a run (if no rotor is selected).
4
This feature is a toggle. To turn off
• This toggles the
now off.
Populating the Rotor Library
In this procedure, you develop a list of rotors that are available to users at your site.
NOTE
You must have Administrator privileges to add rotors to and delete rotors from the rotor library.
3-50
is turned on, the user must select a rotor before starting a run. If a rotor is not
screen as described in
Administrator Options
button.
ROTOR LOGGING
button turns green to indicate that
ROTOR LOGGING
button to accept.
OK
ROTOR LOGGING
Accessing Administrator
, repeat this procedure.
Rotor Logging
button back to gray to indicate that
Options.
has been turned on.
Rotor Logging
Rotor Logging
393552AH
is