Table of Contents
Advertisement
Operation
Manual Operation
4
Press the
5
Press the
Manual Operation
This section includes detailed procedures for entering run parameters for manual operation.
Preparing the Ultracentrifuge
In the first step of a manual run, install the rotor and perform any precooling or prewarming
procedures that may be required. For more information and detailed steps, see
Rotor
Preparation.
Logging In
Depending on your particular setup, you may need to log in with your user name. If your
Administrator enables
prior to the start of a run.
Each user name in the system is accompanied by a PIN. To obtain your PIN, check with your
Administrator.
1
To log in prior to performing any other actions, press the
• The
a. If you have just pressed the
automatically, go to Step 2.
3-6
button to load the program parameters.
OK
button to start the run.
START
is turned on by your Administrator, you will be required to log in
User Login
screen appears.
User Login
START
LOGIN
button to start a run and the
Ultracentrifuge and
button on the Main screen.
screen appears
User Login
393552AH
Advertisement
Table of Contents
