Menu 2.5 Alarms; How To Set Up Alarms - Hardi HC5500 Instruction Book

6 - Menu 2 Setup

Menu 2.5 Alarms

How to set up alarms

Six different alarms can be set up. Choices are listed as follows.
DISPLAY TEXT
[2.5.1 Volume rate]
[2.5.2 Tank contents]
[2.5.3 Spray pressure]
[2.5.4 Fan speed]
[2.5.5 Speed]
[2.5.6 Audio level]
[2.5.7 Sections off ]
When outside the alarm parameters, the relevant warning will flash.
The alarm beep can also be adjusted in audio level in menu [2.5.6
Audio level].
Examples shows volume rate alarm for over or under application for
more than 20 seconds.
Suggested setting is 10%. For no alarm, set at 0.
6.4
NOTES
Suggested setting is 10%
Measured in Gallons
High/low pressure
High/low rpm
Speed max./min.
0 = no sound, 5 is max. volume
Sections switched to OFF