Hardi HC 5500 Quick Manual

Quick Guide: Hardi Controller HC 5500
1st line symbols
Automatic or manual status
Variable rate application status
Service interval warning
Boom status without dual line:
D 1
Section: off
Main: off
Active register (area trip)
Press key shortly and it will show the preset
readout.
Hold key down for a moment and it will work
as a short cut, to a certain menu.
D 2 D 3
Flashing
on on
off on
Symbol display and
register number
Preset key readout
or menu number
Optional readout / height
and width for UCR
Optional readout
Controller functions
%
Preset (press)
D 4
Spraying
on
on
Navigation keys (raise, lower, left, right)
Confirmation key (or Enter)
Clear key (zero's value)
Escape key (no value change)
Activates automatic control and clears % over/under rate
Volume rate
Speed
Tank contents
Area
Sprayed amount
Remaining distance
or area
Spray box switch functions
Power switch
Manual pressure regulation
Main ON/OFF valve
End nozzle ON/OFF
Foam marker interval regulation
Foam marker Left, OFF, Right
Section valves ON/OFF
Optional function, e.g. electric valve etc.
Air volume (TWIN only)
Air slotangle (TWIN only)
Connections
Com 1:
Controller
Printer (optional)
Com 2:
Printer (optional)
Speed input
(if on tractor)
12 Volt
Switch
12 Volt
From sprayer
Spray box
Short cut (press & hold)
Menu 1.1 Volume rate
Menu 3.1.1 Speed calibration
Menu 1.2 Entering tank contents
Menu 1.3.1 Choosing register
Menu 1.3.1 Choosing register
Menu 4.1.1 Measuring distance
Brown
Blue
Brown
Blue