Menu 2.5 Alarms; How To Set Up Alarms; Menu 2.5.6 Audio Level - Hardi HC5500 Instruction Book

Menu 2.5 Alarms

How to set up alarms

Six different alarms can be set up. Choices are listed as follows.
DISPLAY TEXT
[2.5.1 Volume rate]
[2.5.2 Tank contents]
[2.5.3 Spray pressure]
[2.5.4 Fan speed]
[2.5.5 Speed]
[2.5.6 Audio level]
[2.5.7 Sections off ]
When outside the alarm parameters, the relevant warning will flash. The alarm beep can also be adjusted in audio level in
menu [2.5.6 Audio level].
Examples shows volume rate alarm for over or under application for
more than 20 seconds.
Suggested setting is 10%. For no alarm, set at 0.

Menu 2.5.6 Audio level

It is possible to change the sound level for alarms.
Procedure:
Press .
Press to menu [2 Setup].
Press .
Press to menu [2.5 Alarms].
Press .
Press to enter menu [2.5.6 AUDIO LEVEL].
Press .
Set the sound level by changing sound step with
Press to confirm.
Press and hold to exit menu system.
NOTES
Suggested setting is 10%
Measured in Litres
High/low pressure
High/low rpm
Speed max./min.
0 = no sound, 5 is max. volume
Sections switched to OFF
2.5.1
ALARMS
Volume rate
2.5.1
VOLUME RATE
2.5.6
AUDIO LEVEL
Sound step
and .
6 - Menu 2 Setup
XX%
X
35