Navigation Keys; General Keystrokes And Menu System - Hardi HC5500 Instruction Book

Navigation keys

Navigation keys
The navigation keys are initially used for set up in the menu system.
Press # to start this process. Then buttons can be used for the fol-
lowing:
Pressing ¿ will:
Scroll up,
Increase a value,
Increase volume rate in steps or select another preset application
rate.
Pressing ª will:
Scroll down,
Decrease a value,
Decrease volume rate in steps or select another preset application
rate.
Pressing ¶ will:
Move the cursor to the left.
Pressing § will:
Move the cursor to the right.
Pressing ~ will:
Escape a menu (hold to escape all menus),
Escape without changing a value.
Pressing | will:
Clear a value,
Reset the active register (hold until countdown is finished).
Pressing # will:
Enter a menu,
Confirm (accept) a value.
ATTENTION! Some keys have other functions that can be used while spraying.

General keystrokes and menu system

The following is a general description in keystrokes and display readout. The following example of changing the Tank
contents value is used to illustrate this. Try it! The same method is used in all the menus.
ATTENTION! When a menu is open, the blinking number or value is the one that can be altered.
3 - Description
3.5