Menu 3.4 Regulation Constant; Regulation Constant; Menu 3.5 Tank Gauge (Not Used In North America) - Hardi HC5500 Instruction Book

Hide thumbs Also See for HC5500:
Table of Contents

Advertisement

7 - Menu 3 Calibration

Menu 3.4 Regulation constant

Regulation constant

The sensitivity of pressure regulation valve can be adjusted. Increasing the regulation constant will give a faster response
on the pressure regulation valve. If the constant is too high, the valve will become unstable. There will also be excessive
wear on the valve. The range is in percent. The factory default is 50%.
ATTENTION! For sprayers with regulation feedback the value can be reduced to 30 %.

Menu 3.5 Tank gauge (not used in North America)

This menu item is not used in North America.
7.8

Advertisement

Table of Contents
loading

Table of Contents