Menu 1.3 Select Register; Menu 1.3.1 Register Readout And Selection - Hardi HC5500 Instruction Book

5 - Menu 1 Daily settings

Menu 1.3 Select register

Menu 1.3.1 Register readout and selection

Register 1 to 98 can be used for individual areas.
Register 99 is a tally of register trips 1 to 98. They are identified with
a number and it is also possible to name them. The data is saved
when the system is switched off.
To read the totals of all registers:
Shortcut £
Press £ and hold until menu [1.3.1 Register XX] is shown.
Press ¿ or ª to go to register 99. The number is shown on the
1st line and if present, the name on the 4th line.
Press # to enter the register.
Press ¿ to scroll through the data.
Press ~ and hold to exit the menu system.
To read the data in the active register:
Shortcut £
Press £ and hold until menu [1.3.1 Register XX] is shown.
Press # to enter register.
Press ¿ to scroll through the data.
Press ~ and hold to exit the menu system.
To reset register:
Press | and hold until the countdown has ended.
Reset of a register can be stopped if the | key is released before
countdown has ended.
To change the register:
Shortcut £
Press £ and hold until menu [1.3.1 Register XX] is shown.
Press ¿ or ª to change the register.
The number is shown on the 1st line and if present, the name on the 4th line.
Press #. If necessary, the register can be reset.
Press | until the countdown has ended.
Press ~ and hold to exit the menu system.
ATTENTION! The active register number is always visible in the right upper corner of the display.
5.3