Table of Contents
Advertisement
7 - Fault finding
HARDI® C2C and JobCom is powered On (A),
AutoTerrain/AutoHeight/AutoSlant UC5 is loaded
(B); the system should be healthy and be fully
operational.
VT Alarms and Trouble Codes
If the display receives an active trouble code, the
"Virtual Terminal Alarm" (A) will appear in the
Status bar at the top of the screen.
Press the
to see the fault description in the VT
run screen.
A detailed description of the fault can be found in
the Fault finding chapter in the HARDI® Controller
HC 6500/ISOBUS VT Instruction book.
7.4
Hardi - Alarm # Error 11
8.99
ac
Hardi - Alarm # Error 11
Volume rate
Speed
gal/acre
mph
Agitation
valve fault
15.0
mph
!11
Prog. rate
gal/acre
Prog. rate
gal/acre
Prog. rate
gal/acre
Advertisement
Table of Contents
