Quick Guide: Hardi Controller HC 6500
67003500 GB - SW. 1.XX
Display symbols
1. Icons for normal operation, remote control, warnings, track, tank contents,
options A and B, TWIN- presets and register number
2. Icons for foam marker, boom and end nozzles
3. The bottom half is set-up to show up to 5 boxes with information
A. Preset keys
B. Soft keys. When activated, 4 rows appears beside
the buttons F1 - F4
C. Navigation keys
D. Numeric keys
1. Status - diode
2. Preset - Volume rate
3. Preset - Speed
4. Preset - Tank contents
5. Preset - Area treated
6. Preset - Total volume sprayed out
7. Preset - Distance or area remaining
SetBox HC 6400
Press # to proceed into the menu
See the relevant section in the book.
Press ~ and hold to exit the menu system
8. Help key - A short help text will appear
9. To scroll up and down
To increase or decrease a value.
To increase or decrease volume rate in steps or to select another
preset application rate
10. To escape a menu (hold to escape all menus)
To escape without changing value
11. To enter a menu
To confirm (accept) a value
12. To move the cursor to the left or to the right
13. To clear a value
To reset the active register (hold until countdown is finished)
1. Power ON/OFF
2. Status light
3. Pendulum controls
4. Boom fold controls
5. Automatic volume rate
6. Manual pressure control
7. Foam marker regulation
8. Foam marker ON/OFF
9. TWIN presets
10. Air slot for TWIN
11. Air volume for TWIN
12. Optional function A-B
13. HeadlandAssist auto
14. HeadlandAssist manual
15. HeadlandAssist boom centring
16. SafeTrack manual control
17. SafeTrack align
18. SafeTrack auto
19. SafeTrack manual