1MAC054853-MB B
6.1.1.3
6.1.2
6.1.2.1
615 series ANSI
Operation Manual
1.
Select Main menu/Monitoring/IED status/Self-supervision to monitor the latest
fault indication.
2.
Press
or
to scroll the view.
Monitoring condition monitoring data
1.
Select Main menu/Monitoring/I/O status/Condition monitoring.
2.
Press
or
to scroll the view.
3.
Press
to enter or
With PCM600 the user can map output signals from condition monitoring related function
blocks to the appropriate destinations.
Measured and calculated values
Measurement view in Main Menu/Measurements shows the momentary actual values
for various power system measurements.
All values show the momentary measurement value and some include demand values
calculated from a set period.
Invalid or questionable measurement values are presented in parentheses.
Measured values
Measured values can be accessed through the LHMI, WHMI or PCM600.
Measured values available in the protection relay depend on the chosen
functionality, protection relay type and variant.
Table 16:
Examples of the measured values
Indicator
Description
IA-A
Measured current amplitude phase A
IB-A
Measured current amplitude phase B
IC-A
Measured current amplitude phase C
IA2-A
Measured current amplitude phase A
IB2-A
Measured current amplitude phase B
Table continues on next page
to exit a submenu.
Section 6
Operating procedures
91