Controlling And Uploading Of Dfr Recorder Data; Monitoring Fault Records - ABB Relion 615 Series Operation Manual

1MAC054853-MB B
6.1.3.3
6.1.3.4
615 series ANSI
Operation Manual
• Number of recordings currently in the protection relay's memory.
• Remaining amount of recordings that fit into the available recording memory.
• Recording memory used in percentage.
• If the periodic triggering function is used, the time to trigger which indicates
the remaining time to the next periodic triggering of the DFR.
A070863-ANSI V2 EN
Figure 63: Monitoring DFR via the LHMI

Controlling and uploading of DFR recorder data

DFR recorder data can be controlled and read with PCM600. It can also be read via
WHMI.
For more information, see the PCM600 documentation.

Monitoring fault records

Timestamps of the fault records are shown as a list. The first fault record is the newest.
1. Select Main Menu/Monitoring/Recorded data/Fault record.
2.
To navigate between the fault records, press
3.
To enter or exit a submenu, press
Operating procedures
and .
or .
Section 6
95