Section 6
Operating procedures
6.2.2
100
Controlling with single-line diagram
In the single-line diagram view it is possible to open and close the controllable object. The
position indication of the object can be seen on the single-line diagram.
1.
Select the object with
single-line diagram.
The selected object has a square around it.
GUID-BA9EE384-E2F7-4390-9F7B-01E764703820-ANSI V1 EN
Figure 69:
Single-line diagram with one breaker and IEC symbols
GUID-DC9A8A5E-3EBF-4C03-A3BC-CAD34B85269E-ANSI V1 EN
Figure 70:
Single-line diagram with one breaker and ANSI symbols
2.
Press
to open or
3.
Enter the password when prompted.
4.
Select Yes and press
or
if there are more than one controllable object in the
to close the selected object.
to confirm.
1MAC054853-MB B
615 series ANSI
Operation Manual