Setting The Local Hmi; Changing The Local Hmi Language; Adjusting The Display Contrast - ABB Relion 615 Series Operation Manual

Section 8
Commissioning
8.4.3
8.4.3.1
8.4.3.2
136

Setting the local HMI

Changing the local HMI language

1.
Select Main menu/Language and press
2.
Change the language using
3.
Press to confirm the selection.
4. Commit the changes.
A071010 V2 EN
Figure 86: Changing the LHMI language
To change the language using a shortcut, press
anywhere in the menu.

Adjusting the display contrast

Adjust the display contrast anywhere in the menu structure to obtain optimal readability.
•
To increase the contrast, press simultaneously
•
To decrease the contrast, press simultaneously
The selected contrast value is stored in the non-volatile memory if you are logged in and
authorized to control the protection relay. After an auxiliary power failure, the contrast is
restored.
.
or .
and
and
1MAC054853-MB B
and simultaneously
.
.
615 series ANSI
Operation Manual