Condition Monitoring - ABB CM-TCN Manual

7.

Condition monitoring

In the condition monitoring menu the user finds additional information events,
average measured temperatures, operating counter and the simulation mode.
The following values can be set for each parameter:
Menu
Diagnosis
STATUS
Approved
© Copyright 2020 ABB. All rights reserved.
Parame- Symbol
ter
Event his-
tory
Operating
hour
counter
Mainte-
nance
counter
Statistics
Password
reset
counter
Simula-
tion mode
SECURITY LEVEL
Public
S M ART T EMP ER ATUR E MONITORI NG R EL AYS
Explanation Data range
The events con-
tain all infor-
mation related
to a relay trip.
Up to 10 events
are stored.
The operating
hour counter
stores lifetime
information
about the relay.
The mainte-
nance counter
counts the trips
per relay.
In statistics the
user finds the
minimum, maxi-
mum and aver-
age measured
temperature val-
ues per measur-
ing circuit.
Numbers of
password resets
is counted.
Simulation
mode for simu-
lation of tem-
perature values
and relay trips.
DOCUMENT ID.
2CDC112285M0201
[No settings possible]
Can be reset by the
user
[No settings possible]
Cannot be reset by the
user
[No settings possible]
Can be reset by the
user
[No settings possible]
Can be reset by the
user
[No settings possible]
Cannot be reset by the
user
Channel 1-3: [-
200...+850 °C]
Relay 1-3: [NO, NC]
REV. LANG. PAGE
B en 36/42