Changing The Local Hmi Language; Changing Display Symbols - ABB Relion 615 Series Operation Manual

Section 4
Using the HMI
4.1.7
4.1.8
44

Changing the local HMI language

1.
Select Main menu/Language and press
2.
Change the language using
3.
Press to confirm the selection.
4. Commit the changes.
A071010 V2 EN
Figure 16: Changing the LHMI language
To change the language using a shortcut, press
anywhere in the menu.

Changing display symbols

Use the keypad to switch between the display symbols IEC 61850, IEC 60617 and ANSI.
1.
Select Main Menu/Configuration/HMI/FB naming convention and press
2.
Change the display symbols with
3.
Press to confirm the selection.
The protection relay has to be rebooted if the WHMI display symbols are
changed. With the LHMI, the change takes effect immediately.
.
or .
or .
1MAC054853-MB B
and simultaneously
.
615 series ANSI
Operation Manual