ABB Relion 615 Series Operation Manual page 120

Section 7
Troubleshooting
112
Fault indication
Internal Fault
SO-relay(s),X130
Internal Fault
PO-relay(s),X100
Internal Fault
PO-relay(s),X110
Internal Fault
PO-relay(s),X120
Internal Fault
PO-relay(s),X130
Internal Fault
Light sensor error
Internal Fault
Conf. error,X000
Internal Fault
Conf. error,X100
Internal Fault
Conf. error,X110
Internal Fault
Conf. error,X120
Internal Fault
Conf.error,X130
Internal Fault
Card error,X000
Internal Fault
Card error,X100
Internal Fault
Card error,X110
Internal Fault
Card error,X120
Internal Fault
Card error,X130
Internal Fault
LHMI module
Internal Fault
RAM error
Internal Fault
ROM error
Internal Fault
EEPROM error
Table continues on next page
Fault code Additional information
46 Faulty Signal Output relay(s) in card
located in slot X130.
53 Faulty Power Output relay(s) in card
located in slot X100.
54 Faulty Power Output relay(s) in card
located in slot X110.
55 Faulty Power Output relay(s) in card
located in slot X120.
56 Faulty Power Output relay(s) in card
located in slot X130.
57 Faulty ARC light sensor input(s).
62 Card in slot X000 is wrong type, is missing,
does not belong to original configuration or
card firmware is faulty.
63 Card in slot X100 is wrong type or does not
belong to the original composition.
64 Card in slot X110 is wrong type, is missing
or does not belong to the original
composition.
65 Card in slot X120 is wrong type, is missing
or does not belong to the original
composition.
66 Card in slot X130 is wrong type, is missing
or does not belong to the original
composition.
72 Card in slot X000 is faulty.
73 Card in slot X100 is faulty.
74 Card in slot X110 is faulty.
75 Card in slot X120 is faulty.
76 Card in slot X130 is faulty.
79 LHMI module is faulty. The fault indication
may not be seen on the LHMI during the
fault.
80 Error in the RAM memory on the CPU
card.
81 Error in the ROM memory on the CPU
card.
82 Error in the EEPROM memory on the CPU
card.
1MAC054853-MB B
615 series ANSI
Operation Manual