1MAC054853-MB B
615 series ANSI
Operation Manual
4.
To browse different function blocks, scroll the list with
function block press
The function block list is shown in the content area of the display. On the left in the
header, you see the current setting group, and on the right the menu path.
5.
To browse the parameters, scroll the list with
press
.
The setting group values are indicated with #.
A070899-ANSI V2 EN
Figure 76:
Setting group parameter
6.
To select a setting group value, press
A071168-ANSI V2 EN
Figure 77:
Selecting the setting group value
Only values within the selected setting group can be changed.
7.
Press
or
to change the value and
. To move back to the list, press
and to edit the value press
to confirm the selection.
Section 6
Operating procedures
and
and to select a
.
and
and to select a parameter,
.
105