1MAC054853-MB B
Section 4
4.1
4.1.1
615 series ANSI
Operation Manual
Using the HMI
Using the local HMI
To use the LHMI, logging in and authorization are required. Password authorization is
disabled by default and can be enabled via the LHMI.
To enable password authorization, select Main menu/Configuration/
Authorization/Passwords. Set the Local override parameter to "False".
Logging in
1.
Press
to activate the login procedure.
2.
Press
or
to select the user level.
A070888 V2 EN
Figure 10:
Selecting access level
3.
Confirm the selection with
4.
Enter the password when prompted digit by digit.
•
Activate the digit to be entered with
•
Enter the character with
.
and
.
and
.
Section 4
Using the HMI
39