Selecting Fault Records - ABB Relion 615 Series Operation Manual

1MAC054853-MB B
4.2.14
615 series ANSI
Operation Manual
A071226-ANSI V3 EN
Figure 55: The arrow extends outside the circle if the current value is too high

Selecting fault records

1. Fom the main menu, select Monitoring/Recorded data/Fault record or click
Fault records on the menu bar to view a list of all available fault records.
2. Click a record from the Fault records list to open the fault record details view.
3. To go back to the list view, click Fault records on the menu bar or click the View all
button.
4. To save the records in TXT or CSV file formats, select the format from the File
format drop-down list and click Save.
• When the fault record details view is shown, only the shown fault record is
saved.
• When fault record list view is shown, all fault records are saved.
5. To clear all fault records from the protection relay, click Clear records.
This can be done only when the fault record list view is shown.
6. To print all fault records, click Print when the fault record list view is shown.
7. To print only one record, open it in the details view and click Print.
Section 4
Using the HMI
79