ABB Relion 615 Series Operation Manual page 134

Section 8
Commissioning
126
A071224 V1 EN
Figure 83: Obtaining IP address automatically
5. Close all open windows by clicking OK and start PCM600.
Administrator rights are requested to change the configuration as
described above.
Setting the rear communication
To set up a standard PC with MicroSoft Windows operating system for rear
communication:
1. To open Network Connections, click Start, point to Settings, click Control Panel,
and then double-click Network Connections.
2. Double-click the connection that you want to configure, and then click Properties.
3. Select the TCP/IP protocol from the list of configured components using this
connection and click Properties.
1MAC054853-MB B
615 series ANSI
Operation Manual