Engine
•
Remove the camshaft.
See also
Chain removal
Removing the phonic wheel
Removing the tappets
Removing the rods
Installing the camshaft
NOTE
FOR TIMING SYSTEM REFITTING, IT IS NECESSARY TO HEAT THE ENGINE WITH A SUITABLE
HEATER IN ORDER TO INSERT THE CAMSHAFT CORRECTLY AND WITHOUT DAMAGING IT.
Follow the camshaft removal instructions but in reverse order.
Installing the rods
•
Install the head if it has been previously
removed.
•
Replace the four O-rings.
•
Install the two rocking lever rods.
ENG - 48
Norge 1200