MOTO GUZZI Norge 1200 Service Manual page 127

Norge 1200
•
Unscrew and remove the central seal-
ing nut of the timing system control
gear on the crankshaft and collect the
washer.
•
Unscrew and remove the oil pump gear
nut and collect the washer.
•
Remove the chain tensioner and col-
lect the spring.
•
Slide off the three gears together with
the chain.
CAUTION
BE CAREFUL WITH THE OIL PUMP PULLING
COTTER.
See also
Removing the engine from the vehicle
Removing the rods
•
Remove the rocking levers.
•
Unscrew and remove the four nuts and
collect their washers.
Engine
ENG - 45