MOTO GUZZI Norge 1200 Service Manual page 149

Norge 1200
•
Introduce the crankshaft.
•
Place the flywheel side crankshaft sup-
port flange, taking into account the fit-
ting order indicated by the holes.
Specific tooling
19.92.71.00 Tool to fit the sealing ring on the
flywheel-side flange
•
Apply Teflon tape on the two lower fix-
ing screws at the back in order to pre-
vent oil leaks.
•
Screw the eight flange screws on the
flywheel side proceeding diagonally.
Lubrication
Oil pump
Removing
•
Drain all the engine oil.
•
Remove the alternator.
•
Remove the timing system.
•
Remove the shim washer.
Engine
ENG - 67