Installing The Cylinder - MOTO GUZZI Norge 1200 Service Manual

Engine
•
Insert the pin clip.

Installing the cylinder

•
Fit the piston.
•
Remove the cloth used to prevent foreign bodies coming into the crankcase.
•
Turn the rings so that the junction ends are 120 degrees from each other.
•
Lubricate piston and cylinder.
•
Using a specific tool for piston ring clamps, place the cylinder.
CAUTION
DURING THIS OPERATION, PAY ATTENTION NOT TO DAMAGE THE PISTON.
Specific tooling
05.92.80.30 Piston ring clamp
•
Remove the piston ring clamp tool and
finish positioning the cylinder.
Specific tooling
05.92.80.30 Piston ring clamp
CAUTION
UPON REFITTING DO NOT INVERT THE POSI-
TION OF THE CYLINDER GASKET SO AS NOT
TO COMPROMISE LUBRICATION.
ENG - 58
Norge 1200