MOTO GUZZI Norge 1200 Service Manual page 108

Engine
•
Replace the gasket and place the al-
ternator frame using the front cover in-
sertion cone.
•
Remove the insertion cone afterwards.
Specific tooling
05.91.17.30 Front cover insertion cone
•
Tighten the two screws.
•
Tighten the eight lower screws.
•
Operating diagonally and in stages,
tighten the ten fixing screws on the al-
ternator fitting.
•
Position the lower pulley and the
spacer.
•
Tighten the nut to the prescribed tor-
que.
ENG - 26
Norge 1200