Maintenance
•
Pull the filler plug / oil level dipstick (1)
straight out.
•
Wipe the oil level dipstick (1) clean and
reinsert it.
•
Pull it out again and check the oil level.
•
The oil level is correct when it is close
to the "MAX" mark. Otherwise, top-up
with engine oil.
Replacement
NOTE
HOT OIL IS MORE FLUID AND WILL DRAIN OUT MORE EASILY AND COMPLETELY.
•
Place a container with + 4000 cm³ (245
cu in) capacity under the drainage plug
(2).
•
Unscrew and remove the drainage
plug (2).
•
Unscrew and remove the filler plug (3).
•
Drain the oil into the container; allow
several minutes for oil to drain out com-
pletely.
•
Check and if necessary, replace the
sealing washers of drainage plug (2).
•
Remove any metal scrap attached to
the drainage plug (2) magnet.
•
Screw and tighten the drainage plug
(2).
•
Pour new oil until it goes above the
minimum level marked "MIN".
MAIN - 6
Norge 1200