MOTO GUZZI Norge 1200 Service Manual page 123

Norge 1200
•
Place the valve (6) inside the head.
•
Place the lower retainer (5) and the
shimming washers.
•
Place the external spring (4).
•
Place the internal spring (3).
•
Insert the upper retainer (2).
•
Place the two cotters (1) on the seats
on the valves.
•
Compressing the spring with the spe-
cial valve tool, install the valve cotters.
Specific tooling
10.90.72.00 Tool for valve removal and refitting
NOTE
UPON REFITTING, PLACE THE O-RING COR-
RECTLY ON THE VALVE.
•
Remove the special tool
Engine
ENG - 41