Norge 1200
the brake lever and will make it reach
the end of stroke.
•
Close the bleed valve before the lever
reaches its end of stroke.
•
Repeat the operation until the fluid
draining into the container is air-bubble
free.
NOTE
WHILE PURGING THE HYDRAULIC SYSTEM,
FILL THE RESERVOIR WITH THE NECESSARY
QUANTITY OF BRAKE FLUID CHECK THAT,
DURING THE OPERATION, THERE IS ALWAYS
BRAKE FLUID IN THE RESERVOIR.
•
Screw the bleed valve and remove the pipe.
•
Top-up the reservoir until the right brake fluid level is obtained.
•
Refit and lock the rear brake oil reservoir cap.
•
Refit the rubber protection cover.
Braking system
BRAK SYS - 19