modbar av Series Manual page 87

Coffee Boiler
Enter Password
Coffee Boiler
Settings
Display
After accessing the "Technical" programming menu and entering the password, use the buttons T1
1
Enter Password
until the following screen is displayed.
2
Coffee Boiler
Press the T3 button
Settings
Press the T3 button
3
CB1 Enabled
ENABLED
to select
ENABLED
you can set the following parameters.
Press the T3 button
4
CB1 Temperature
ture, press the T3 button
93.0°C 94,5 °C
perature of the group while the temperature on the right is the set temperature.
WATER TEMPERATURE OVER 52°C CAN CAUSE SEVERE BURNS IN STANTLY OR DEATH FROM SCALDING.
Description
• This parameter enables the technician
to set various parameters of the coffee
boiler.
• The temperature of the
measured at the most critical point in
the boiler where temperature fluctuation
is the greatest.
• The temperature of the water exiting the
group head is held constant by means
of the mass of the group casting. Even
Operating Procedure
to enter the menu.
to enter the menu, move between the parameters using the buttons T1
DISABLED
or , press the T3 button
to enter the menu, move with the buttons T1
to confirm the value. The temperature indicated on the left is the actual tem-
DANGER
THE COFFEE BOILER CONTAINS WATER AT ELEVATED TEMPERATURES.
"Technical" Programming
though the temperature of the boiler
may vary slightly, the temperature of the
water exiting the group is constant.
• To properly calibrate the temperature
of any espresso machine it is import to
boiler is
measure the temperature of the water
exiting the group by means of an external
temperature measuring device. The
difference of the display temperature
and the measured temperature may be
compensated by use of the "Coffee T.
Offset" parameter.
to confirm the option. In the case of option enabled
and T2 to set the desired tempera-
and T2
and T2
87