modbar av Series Manual page 85

Scale Configuration
Enter Password
Scale
Configuration
Display
9
View Scale
Press the T3 button
Versions
10
G1 Scale
Use T1 and T2
HW3.0 FW2.5.2
11
View Versions
Press the T3 button
Exit
Press T1 or T2
12
Scale Settings
Exit
programming.
(only on ABR espresso machine models)
Description
• This parameter allows the operator to
view and manually change each dose for
each Selection Indicator.
• For greater accuracy and consistency of
the doses, it is recommended that you
set each Selection Indicator.
• The dose can be set by pulses or by
mass (weight).
Operating Procedure
to enter the menu.
to display the hardware and software version installed.
to exit the submenu
until the display shows the exit menu, press the T3 button
"Technical" Programming
• This parameter enables the technician
to set some scale parameters like:
- Enabling/disabling the
parameter;
- Setting the weight reading time;
- Calibrating the scales;
- Updating the scale software.
to return to the "Technical"
offset
85