modbar av Series Manual page 42

Accessing Programming Mode
Programming Mode
G1█ MODBAR G2█
163Puls 0Puls
Display
4
G1 MODBAR G2
█ █
While the espresso machine is on, press and hold the button T3
163Puls 0Puls
following display appears.
This is the "Technical" programming level. Enter the password and press the buttons T1
between the available parameters, press the T3 button
5
Enter Password
NOTE: You must scroll to the exit menu to exit the programming mode, or press at the same time the buttons
T2 and T3.
42
Description
• Technical Programming - The parameters
contained within this level are ones
the operator can change to affect the
performance of the espresso machine.
These parameters are set in the factory
and their adjustment requires
intervention of a service technician La
Marzocco reccomends that no changes
are made at this level. The Technician
Password is required for access.
Operating Procedure
Technical" Programming Level
the
. After approximately 10 seconds the
to confirm.
and T2 to move