modbar av Series Manual page 75

Program Dose
Group Dose
Settings
Group 1 Dose
Settings
Display
After accessing the "Technical" programming menu and entering the password, use the buttons T1
1
Enter Password
until the following screen is displayed.
2
Group Dose
Move between the parameters using the buttons T1
Settings
3
Group 1 Dose
Press the T3 button
Settings
Press the T3 button
4
G1 Dose Mode
MASS BREWRATIO
DOSE
and
Description
• This parameter allows the operator to
program the amount of coffee (brewing
amount) for each Selection Indicator.
• The brewing amount can be set in terms
of time (sec.), pulses, mass or brewratio.
• Once programmed, the
Indicator remains lighted.
Operating Procedure
or T2
to start the doses programming procedure.
to access the menu, then navigate using T1
, press the T3 button to confirm the option.
"Technical" Programming
• It is possible to set the dose for both
a short and a long shot on the same
Selection Indicator.
• PULSE mode: control of doses in volume
• MASS mode: control of doses in mass
Selection • BREW RATIO mode: ratio between the
coffee powder and the weight of the
drink
until the display shows:
and T2 to choose between
and T2
PULSES
,
75