modbar av Series Manual page 51

Program Dose
Group Dose
Settings
Group 1 Dose
Settings
Display
Press Enter
To Exit
Press b To Stop
10 pulses
To set the brewing time of a short shot, it will be necessary to activate the tap lever until water flows from the
12
group, activate again the tap lever to stop and store the desired dose.
G1B1 Saved
10 Pulses
Press the button T1
13
↓ Short Dose
60
button T1
Press the T3 button
14
↓ Long
BACKFLUSH
3 SEC RINSE
Description
• This parameter allows the operator to
program the amount of coffee (brewing
amount) for each Selection Indicator.
• The brewing amount can be set in terms
of time (sec.), pulses, mass or brewratio.
• Once programmed,
Indicator remains lighted.
Operating Procedure
or T2 to view the dose. Pressing the button T3
or T2 to change the value, press the button T3
to access the menu, then navigate using T1
3 SEC RINSE CONTINUOUS
, and
• It is possible to set the dose for both
a short and a long shot on the same
Selection Indicator.
• PULSE mode: control of doses in volume
• MASS mode: control of doses in mass
the Selection • BREW RATIO mode: ratio between the
coffee powder and the weight of the
drink
, the dose value will blink. Use the
to confirm the desired value.
and T2
, press the T3 button to confirm the option.
"Barista" Programming
DOSE
to choose between ,
51