modbar av Series Manual page 80

"Technical" Programming
Program Dose
Group Dose
Settings
Group 1 Dose
Settings
Display
After accessing the "Technical" programming menu and entering the password, use the buttons T1
1
Enter Password
until the following screen is displayed.
2
Group Dose
Move between the parameters using the buttons T1
Settings
3
Group 1 Dose
Press the T3 button
Settings
Press the T3 button
4
G1 Dose Mode
MASS
DOSE
and
80
(only on ABR espresso machine models)
Description
• This parameter allows the operator to
program the amount of coffee (brewing
amount) for each Selection Indicator.
• The brewing amount can be set in terms
of time (sec.), pulses, mass or brewratio.
• Once programmed,
Indicator remains lighted.
Operating Procedure
to start the doses programming procedure.
to access the menu, then navigate using T1
BREWRATIO
, press the T3 button
• It is possible to set the dose for both
a short and a long shot on the same
Selection Indicator.
• PULSE mode: control of doses in volume
• MASS mode: control of doses in mass
the Selection • BREW RATIO mode: ratio between the
coffee powder and the weight of the
drink
or T2 until the display shows:
and T2
to confirm the option.
and T2
PULSES
to choose between ,