modbar av Series Manual page 62

"Barista" Programming
Keypad LEDs
Group Dose
Settings
Keypad LEDs
ENABLED
Display
When the espresso machine is turned on, press and hold the T3 button
1
G1 MODBAR G2
█ █
163Puls 0Puls After about 5 seconds the following screen is displayed.
2
Group Dose
Move between the parameters using the buttons T1
Settings
Press the T3 button
3
Keypad LEDs
ENABLED
ENABLED
4
Press T1
62
Description
• This parameter allows the operator to
enable/disabled the keypad led.
to access the menu, then navigate using T1
DISABLED
and , press the T3 button
or T2 to continue with the programming of the other parameters.
Operating Procedure
to access the "Barista" programming.
or T2 until the display shows:
and T2
to confirm the option.
to choose between