modbar av Series Manual page 83

Scale Configuration
Enter Password
Scale
Configuration
Display
After accessing the "Technical" programming menu and entering the password, use the buttons T1
1
Enter Password
until the following screen is displayed.
2
Scale
Press the T3 button
Configuration
Press the T3 button
3
Auto Offset
ENABLED
ENABLED
to select
Press the T3 button
4
Scale Tare Time
3s
desired value. This parameter is common to all groups.
(only on ABR espresso machine models)
Description
• This parameter allows the operator to
view and manually change each dose for
each Selection Indicator.
• For greater accuracy and consistency of
the doses, it is recommended that you
set each Selection Indicator.
• The dose can be set by pulses or by
mass (weight).
Operating Procedure
to start the doses programming procedure.
to enter the menu, move between the parameters using the buttons T1
DISABLED
or , press the T3 button
to enter the menu, navigate the parameters using the buttons T1
"Technical" Programming
• This parameter enables the technician
to set some scale parameters like:
- Enabling/disabling
parameter;
- Setting the weight reading time;
- Calibrating the scales;
- Updating the scale software.
to confirm the option.
the offset
and T2
and T2
and T2 to set the
83