modbar av Series Manual page 55

Program Dose
Group Dose
Settings
Group 1 Dose
Settings
Display
Press the button T1
9
G1 Coffee Mass
14.0g
blink. Use the button T1
Press T1
10
Exit
Group 1
programming.
11
Press T1
Press T2
12
G1 MODBAR G2
█ █
163Puls 0Puls
espresso machine.
(only on ABR espresso machine models)
Description
• This parameter allows the operator to
program the amount of coffee (brewing
amount) for each Selection Indicator.
• The brewing amount can be set in terms
of time (sec.), pulses, mass or brewratio.
• Once programmed,
Indicator remains lighted.
Operating Procedure
or T2 to view the coffee mass of each group. Pressing the button T3
or T2 to change the value, press the button T3
or T2 until the display shows the exit menu, press the T3 button
or T2 to continue with the programming of the other parameters.
and T3 at the same time to exit the programming mode and return to the normal use of the
"Barista" Programming
• It is possible to set the dose for both
a short and a long shot on the same
Selection Indicator.
• PULSE mode: control of doses in volume
• MASS mode: control of doses in mass
the Selection • BREW RATIO mode: ratio between the
coffee powder and the weight of the
drink
to confirm the desired value.
, the value will
to return to the "Barista"
55