modbar av Series Manual page 76

"Technical" Programming
Program Dose
Group Dose
Settings
Group 1 Dose
Settings
Display
Press the T3 button
5
↑ Short
DOSE BACKFLUSH
6
↑ Short Program
Press the T3 button
Volume Dose
Press Enter
To Exit
Press b To Stop
10 pulses
To set the brewing time of a short shot, it will be necessary to activate the tap lever until water flows from the
7
group, activate again the tap lever to stop and store the desired dose.
G1B1 Saved
10 Pulses
76
Description
• This parameter allows the operator to
program the amount of coffee (brewing
amount) for each Selection Indicator.
• The brewing amount can be set in terms
of time (sec.), pulses, mass or brewratio.
• Once programmed,
Indicator remains lighted.
Operating Procedure
to access the menu, then navigate using T1
3 SEC RINSE CONTINUOUS
, and
to start the doses programming procedure.
• It is possible to set the dose for both
a short and a long shot on the same
Selection Indicator.
• PULSE mode: control of doses in volume
• MASS mode: control of doses in mass
the Selection • BREW RATIO mode: ratio between the
coffee powder and the weight of the
drink
and T2
, press the T3 button to confirm the option.
DOSE
to choose between ,