modbar av Series Manual page 53

Program Dose
Group Dose
Settings
Group 1 Dose
Settings
Display
When the espresso machine is turned on, press and hold the T3 button
1
G1 MODBAR G2
█ █
163Puls 0Puls After about 5 seconds the following screen is displayed.
2
Group Dose
Move between the parameters using the buttons T1
Settings
3
Group 1 Dose
Press the T3 button
Settings
Press the T3 button
4
G1 Dose Mode
MASS
BREWRATIO
and
(only on ABR espresso machine models)
Description
• This parameter allows the operator to
program the amount of coffee (brewing
amount) for each Selection Indicator.
• The brewing amount can be set in terms
of time (sec.), pulses, mass or brewratio.
• Once programmed,
Indicator remains lighted.
Operating Procedure
to start the doses programming procedure.
to access the menu, then navigate using T1
BREWRATIO
, press the T3 button
"Barista" Programming
• It is possible to set the dose for both
a short and a long shot on the same
Selection Indicator.
• PULSE mode: control of doses in volume
• MASS mode: control of doses in mass
the Selection • BREW RATIO mode: ratio between the
coffee powder and the weight of the
drink
to access the "Barista" programming.
or T2 until the display shows:
and T2
to confirm the option.
PULSES
to choose between ,
53