Transport And Storage; Handling And Positioning; Electrical Connection; Operation Information - BONFIGLIOLI ACTIVE Manual

1.3
Transport and storage are to be done in an adequate way in the original packaging.
Storage shall be in dry rooms protected against dust and moisture with slight tem-
perature fluctuations. Please observe the climatic conditions according to EN 50178
and the marking on the packaging.
The duration of storage without connection to the admissible reference voltage may
not exceed one year.
1.4
Warning! Damaged or destroyed components may not be put into operation be-
The frequency inverters are to be used according to the documentation, the directives
and the standards. Handle carefully and avoid mechanical overload. Do not bend the
components or change the isolation distances. Do not touch electronic components or
contacts. The devices contain construction elements with a risk of electrostatic, which
can easily be damaged by improper handling. Any use of damaged or destroyed com-
ponents shall be considered as a non-compliance with the applicable standards. Do
not remove any warning signs from the device.
1.5
Warning! Before any assembly or connection work, de-energize the frequency in-
While working on the frequency inverters, obey the applicable standards BGV A2
(VBG 4), VDE 0100 and other national directives. Comply with the information in the
documentation on electrical installation and the relevant directives. Responsibility for
compliance with and examination of the limit values of the EMC product standard EN
61800-3 for variable-speed electrical drive mechanisms is with the manufacturer of
the industrial plant or machine.
The documentation contains information on installation correct for EMC. The cables
connected to the frequency inverters may not be subjected to an isolation test with a
high test voltage without previous circuit measures.
1.6
Warning! Before commissioning and the start of the intended operation, attach all
1.7
Warning! Unauthorized opening and improper interventions can lead to physical
06/05
06/05

Transport and storage

Handling and positioning

cause they may be a health hazard.

Electrical connection

verter. Make sure that the frequency inverter is de-energized.
Do not touch the sockets, because the capacitors may still be charged.
Comply with the information given in the operating instructions and on
the frequency inverter label.

Operation information

the covers and check the sockets. Check additional monitoring and pro-
tective devices pursuant to EN 60204 and the safety directives applicable
in each case (e.g. Working Machines Act, Accident Prevention Directives
etc.).
No connection work may be performed, while the system is in operation.

Maintenance and service

injury or damage to property. Repairs on the frequency inverters may
only be done by the manufacturer or persons authorized by the latter.
5
5