BONFIGLIOLI ACTIVE Manual page 36

Note:
Examples STEP7-Program:
// OUT_PZDx are symbols for the equivalent peripheral adresses
// Boolean
BC1:
BC2:
// Percent
// Frequency
34
34
The meaning of the content of the OUT-PZDx data and sources is based
on the use in question.
If, for example, Boolean variables are to be used, the corresponding en-
tries TRUE/FALSE in the OUT-PZDx objects are to be done on the PLC
side. On the device side, only the assigned Boolean sources (750 - 753)
are then relevant. The Word and Long sources then do not contain any
sensible data.
Any combinations of Boolean, Word and Long can be used. Only pay at-
tention to the assignment of the output objects in the PLC and the as-
signed sources.
U E 1.0
FP M 1.0
SPBN BC1
L L#65535
T OUT_PZD3
U E 1.0
FN M 1.1
SPBN BC2
L 0
T OUT_PZD3
...
L "AnalogIn2"
SRW 7
L 49
*I
T OUT_PZD6
L "AnalogIn1"
SRW 7
L 90
*I
T OUT-PZD4 Long
// no pos. edge
// pos. edge
// store TRUE to OUT-PZD3 Boolean
// no neg. edge
// neg. edge
// store FALSE to OUT-PZD3 Boolean
// load analogue-input 2
// scale to 0...100,00 = 0 ... 10000
// store value to OUT-PZD6 Word
// load analogue-input1
// scale to Profidrive notation !!!
// store value to OUT-PZD4 Long
06/05
06/05