11 Parameter list
The parameter list is structured according to the menu branches of the operating unit.
For better clarity, the parameters have been marked with pictograms:
11.1
Note:
11.2
Note:
06/05
06/05
The parameter is available in the four data sets
The parameter value is set by the SET-UP routine
This parameter cannot be written in the operation of the frequency inverter.
Actual value
Actual values of the frequency inverter
No.
Description
228 Internal reference frequency
249 Active data set
250 Digital inputs
270 Warnings
281 DP-Master OUT
282 Reference bus frequency
283 Reference ramp frequency
284 DP-Master IN
The parameters
displayed via the VPlus program. Operation of the VPlus program in use of
the Profibus-DP communication module CM-PDP is only possible via the
optional KP232 serial adapter on the slot of the KP500 control unit.
The parameter
channel of objects PPO1 and PPO2. It cannot be addressed via the VPlus
program or the KP500 control unit.
Parameter
Rated motor parameters
No.
Description
375 Rated frequency
390 Profibus Reference
391 Profibus Node-ID
392 State-transition 5
412 Local/Remote
414 Data set selection
424 Emergency stop clockwise
425 Emergency stop anticlockwise
434 Ramp set point
549 max. Control deviation
637 Switch-off threshold
638 Holding time"
The parameter
cation channel of objects PPO1 and PPO2. It cannot be addressed via the
VPlus program or the KP500 control unit.
Unit
Hz
-
-
-
-
Hz
Hz
-
DP Master OUT
281 and
Warnings
270 is only accessible via the communication
Unit
Hz
Profibus
Hz
-
Bus control
-
-
Data set change-over
-
Frequency ramps
Hz/s
Hz/s
Frequency ramps
-
Digital outputs
%
Stopping behavior
%
s
Data set selection
414 is only accessible via the communi-
Display range
Chapter
-1000,00 to 1000,00
1 to 4
0 to 255
0 to 0xFFFF
String
-1000.00 to 1000.00
-1000.00 to 1000.00
String
DP Master IN
284 can only be
Setting range
Chapter
10.00 to 1000.00
0.00 to 999.99
0 to 126
0 to 2
10.2.3.2
0 to 44
0 to 4
0.01 to 9999.99
10.2.3.1
0.01 to 9999.99
10.2.3.1
1 to 3
0.01 to 20.00
0.0 to 100.0
10.2.3.1
0.0 to 200.0
10.2.3.1
10.2.5
10.2.1
10.2.4
12.1
10.3
10.2.5
10.2.5
10.3
10.2.5
10.2.5
6
10.2.1
10.2.1
10.2.5
10.2.2
37
37
Need help?
Do you have a question about the ACTIVE and is the answer not in the manual?
Questions and answers