Notes On Ce Marking; Intended Use; Proper Environment - MICRO-EPSILON wireSENSOR WDS Series Operating Instructions Manual

Safety
The supply voltage must not exceed the specified limits
> Damage to or destruction of the sensor
Avoid shocks and impacts to the sensor.
> Damage to or destruction of the sensor
1.3
For all WDS draw-wire displacement sensors, the EC Directive 2006/42/EC shall apply.
For all WDS draw-wire displacement sensors with potentiometer, the EU Directive 2011/65/EU shall also
apply.
Draw-wire displacement sensors with potentiometer output are devices (components) which cannot be op-
erated autonomously and do not carry a CE mark. Therefore, an EU Declaration of Conformity is not issued
according to EMC law and the Machinery Directive.
1.4
- Draw-wire displacement sensors are used for test applications during crash tests, for simulators and in test
- Sensors must only be operated within the limits specified in the technical data, see Chap. 2.3.
- Draw-wire displacement sensors must be used only in such a way that no persons are endangered or
- Take additional precautions for safety and damage prevention in case of safety-related applications.
1.5
- Sensor protection class: IP 50
- Temperature range:
- Humidity:
- Ambient pressure:
wireSENSOR, WDS series

Notes on CE Marking

Intended Use

benches.
machines and other material goods are damaged in the event of malfunction or total failure of the sensor.

Proper Environment

ƒ Operation: -40 °C ... +85 °C (-40 ... +185 °F)
ƒ Storage: -40 °C ... +85 °C (-40 ... +185 °F)
5 - 95% (non-condensing)
Atmospheric pressure
Page 8