Decommissioning, Disposal; Service, Repair - MICRO-EPSILON wireSENSOR WDS Series Operating Instructions Manual

Decommissioning, Disposal

8.
Incorrect disposal may cause harm to the environment.
9.
In the event of a defect in the sensor, please send in
the affected parts for repair or replacement.
If the cause of a fault cannot be clearly identified,
please send the entire measuring system to:
wireSENSOR, WDS series
Decommissioning, Disposal
Disconnect the measuring wire from the measured object. Do not let the measuring wire return without
control (snap).
Dispose of the device, its components and accessories as well as the packaging materials in compli-
ance with the applicable country-specific waste treatment and disposal regulations of the region of use.

Service, Repair

MICRO-EPSILON MESSTECHNIK
GmbH & Co. KG
Königbacher Str. 15
94496 Ortenburg / Germany
Tel. +49 (0) 8542 / 168-0
Fax +49 (0) 8542 / 168-90
info@micro-epsilon.de
www.micro-epsilon.com
Page 22