Table of Contents
Advertisement
Delivery
3.
3.1
1 Sensor
1 Assembly instructions
i
Optional accessories are listed in the appendix, see Chap.
3.2
Store sensors solely with the transport lock installed. This prevents the measuring wire from ever being pulled
out and unintentional snapping.
> Risk of injury due to whiplash of the wire with mounting bolts/hooks
- Temperature range for storage: -40 °C - +85 °C (-40 ... +185 °F)
- Humidity:
wireSENSOR, WDS series
Delivery
Unpacking/Included in Delivery
Do not remove draw-wire displacement sensors from packaging using the wire, threaded bolts on the
wire or the wire eye.
Transport them in such a way that they cannot be damaged.
Check the delivery for completeness and shipping damage immediately after unpacking.
If there is damage or parts are missing, immediately contact the manufacturer or your supplier.
The transport lock of the measuring wire must only be removed immediately prior to installation and only
by technical staff.
Storage
A
1.
5 - 95 % (non-condensing)
Page 12
Advertisement
Table of Contents
Need help?
Do you have a question about the wireSENSOR WDS Series and is the answer not in the manual?
Questions and answers